11-217 comp camshaft solid lifters adjustment,11-217 Comp Camshaft Solid Lifters Adjustment: A Comprehensive Guide

11-217 Comp Camshaft Solid Lifters Adjustment: A Comprehensive Guide

When it comes to fine-tuning the performance of your engine, understanding how to adjust the solid lifters on your 11-217 Comp Camshaft is crucial. Solid lifters are an essential component in camshaft operation, directly affecting the engine’s power and efficiency. In this detailed guide, we will delve into the process of adjusting solid lifters, highlighting the importance of proper adjustment and providing step-by-step instructions to ensure optimal engine performance.

Understanding the 11-217 Comp Camshaft

The 11-217 Comp Camshaft is a high-performance camshaft designed for engines seeking increased power and torque. It features a unique profile that enhances valve lift and duration, allowing for better airflow and combustion efficiency. To maximize the benefits of this camshaft, it is essential to adjust the solid lifters correctly.

Why Adjust Solid Lifters?

Adjusting solid lifters is crucial for several reasons:

• Ensures proper valve timing and duration

• Reduces valve train noise and wear

• Improves engine performance and efficiency

  

Tools and Materials Needed

Before you begin the adjustment process, gather the following tools and materials:

• 11-217 Comp Camshaft

• Solid lifters

• Camshaft adjustment tool

• Engine oil

• Wrenches and sockets

• Feeler gauges

Step-by-Step Adjustment Process

Follow these steps to adjust the solid lifters on your 11-217 Comp Camshaft:

1. Remove the valve cover and inspect the camshaft and lifters for any damage or wear.

2. Position the engine at top dead center (TDC) for the intake valve. This ensures that the camshaft is in the correct position for adjustment.

3. Loosen the camshaft bolt and remove the camshaft from the engine.

4. Install the camshaft adjustment tool onto the camshaft. This tool allows you to adjust the lifters without removing them from the engine.

5. Adjust the solid lifters using the adjustment tool. The recommended clearance for solid lifters is typically between 0.015 and 0.020 inches. Use feeler gauges to measure the clearance and make necessary adjustments.

6. Reinstall the camshaft into the engine, ensuring that it is properly seated.

7. Secure the camshaft bolt and torque it to the manufacturer’s specifications.

8. Reinstall the valve cover and check for any leaks.

9. Start the engine and let it idle for a few minutes to ensure that the adjustment is holding.

Table: Recommended Clearance for Solid Lifters

Common Mistakes to Avoid

When adjusting solid lifters, it is essential to avoid the following common mistakes:

• Over-tightening the camshaft bolt

• Not using the correct feeler gauge for clearance measurement

• Not allowing the engine to idle for a few minutes after adjustment

Conclusion

Adjusting the solid lifters on your 11-217